How To Change Lock Code On Kwikset

Download Commodity

Download Article

A Kwikset lock is a user-friendly way to become in and out of your habitation without keys, but how do you manage the codes for yourself and your guests? Adding and deleting codes on Kwikset locks is a straightforward procedure you can larn in no fourth dimension. In this article, we'll walk you through how to add together new User Codes and delete them from traditional and touchscreen models, plus how to do a manufacturing plant reset and program your own Mastercode. If you're prepare to secure your door, go along scrolling!

Things Y'all Should Know

• Add User Code: Printing the programme button the number of times that matches the lawmaking position you want to make full, enter the code, and press the lock push button.
• Delete User Code: Press the program push button the number of times that matches the old code position, enter a new code, and press the lock button.
• Delete User Code on touchscreen: Press the program, checkmark, and lock buttons. Enter the code twice, followed by the lock push button both times.

1. 1

   Open and unlock your door. E'er proceed your door open when programming a keyless lock. That way, you lot won't be locked out if something goes incorrect and the door won't unlock. Make certain to take your physical key on you also, just in instance.^[1]

2. ii

   Slide the bombardment embrace off the interior side of the lock. Depending on the model, at that place may exist 2 or 3 security screws around the edges of the cover holding it in place. Use a screwdriver for normal screws or the allen wrench your lock came with for hex screws.^[two]

   Ad

3. 3

   Press the program button the number of times that matches the code position. For example, if you want to plan User Code ii, press the program button twice. Many Kwikset locks concur iv User Codes, simply some concur every bit many as xxx at once. The programme push is a modest blackness push button in the battery compartment of the lock.^[3]

   • Depending on the model, yous may demand a paperclip or some other long, thin object to printing the program button if information technology'due south recessed.
   • On touchscreen models, hold the program push button until the light-green check marker symbol lights upwards, so press the check mark.^[4]

4. 4

   Enter the new User Code you want to program. Depending on your model, the code must exist betwixt 4 and 8 digits. Choose a code you'll recall easily and write information technology down or store it somewhere safe.^[v]

   • Some locks take buttons with 2 digits on them. Press the button once to go either number. For example, printing the "3 4" button once to enter either 3 or 4.
   • Push models commonly require User Codes between 4 and eight digits. Some touchscreen models can have codes upward to 10 digits.

5. 5

   Press the lock push button one time. The lock button is located on the exterior side of the lock on both touchscreen and traditional models. The lock volition beep to ostend the entry was successful. On touchscreen models, the dark-green checkmark will calorie-free upwardly.^[6]

6. 6

   Test the new User Code with the door open up to make certain it's working. If the lawmaking doesn't piece of work, double bank check that it's not a indistinguishable of some other programmed code. Check your user guide to confirm yous entered an appropriate number of digits for your model.^[seven]

   • Supercede the battery cover once you've finished programming.

7. 7

   Program a new code over an existing code to delete it. For instance, if you desire to delete the User Code in position iv, press the program button iv times and then enter the new code in that spot. The quondam lawmaking will exist overridden and deleted, and the new lawmaking will have its place.^[8]

Advertisement

1. ane

   Take off the battery cover from the interior side of the lock. Unscrew the security screws around the edge, or simply slide it off if you left the screws out for piece of cake access. Depending on the model, yous may demand a regular screwdriver or an allen wrench.^[9]

2. 2

   Press the plan push, then the checkmark and lock buttons. The program button is a small black push located within the battery compartment. Hold the programme button until a green cheque mark appears, and then press both the checkmark and the lock button.^[10]

3. 3

   Enter the lawmaking you desire to delete, printing the lock button, and repeat. After yous enter the code and printing the lock button the outset time, enter the code again to confirm. Press the lock button a second fourth dimension to delete the code.^[11]

4. 4

   Test the code to cheque that it no longer works. Make certain the door remains open while you ostend y'all programmed the lock correctly. If the lawmaking even so works, repeat this process and make sure yous're entering the verbal same code both times.^[12]

Advertisement

1. 1

   Remove the battery cover from the interior side of the lock. Depending on the model, unscrew the security screws effectually the edges of the encompass or just slide it off. You may need a regular screwdriver or an allen wrench, depending on the type of screw.^[13]

2. 2

   Remove the bombardment pack. The bombardment pack is a small plastic container containing iv AA batteries in almost models. Simply slide information technology up and out of the battery compartment.^[14]

3. 3

   Press and hold the program push button while y'all reinsert the battery pack. Go on property the plan button for thirty seconds. When time is upward, the LED status low-cal will begin flashing red.^[15]

4. 4

   Printing the program button again. The LED status light will flash green and the lock will beep once. This indicates that the reset is complete and all User Codes have been deleted.^[16]

   • One some models, the light volition flash red and green several times.^[17]
   • Depending on the model, the lock will automatically begin the handing process to decide which way the deadbolt goes.
   • Supervene upon the battery cover one time yous've finished programming.

Advertizement

1. 1

   Remove the battery cover from the dorsum side of the lock. Depending on your model, there may be 2 or 3 security screws around the edges of the cover. You'll need a regular screwdriver or an allen wrench, depending on the type of screw.^[xviii]

   • Programming Mastercodes allow you lot to add together and delete User Codes without having to remove the battery cover and admission the physical program button.

2. 2

   Press and hold the program button. The plan button is a small-scale black button located near the battery pack. Concur the button down for at least v seconds until the keypad flashes green.^[19]

3. three

   Enter your custom Mastercode, then press the lock button. Almost models (traditional and touchscreen) require the Mastercode to be between four and 8 digits. For security purposes, do not choose a code that is too in use as a User Code.^[20]

   • The Programming Mastercode will not unlock the door. It only lets you manage your User Codes without needing to access the physical program push.
   • Mastercodes are not automatically enabled and are optional to utilise. If you find y'all don't like or desire information technology, you can disable it after.

4. 4

   Re-enter your custom Mastercode, then press the lock button again. You've at present successfully enabled a Mastercode and tin use information technology to manage User Codes.^[21]

   • If yous see a ruby-red flash (or "X" symbol on touchscreens), the programming was not successful. Try again and make sure to enter the same code both times.

5. 5

   Disable the Mastercode (optional). Printing and concord the program push until the keypad turns green. Press the lock button, enter the Mastercode, and so printing the lock push again. Enter the Mastercode a second time to confirm, and so press the lock button a 3rd time to disable.^[22]

   • Disable the Mastercode and choose a new i when somebody learns what information technology is to proceed your home secure.

Advertisement

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

• Cull codes that are memorable for y'all but difficult for other people to guess. Avoid using things like birthdays, addresses, or phone numbers.^[23]

• Change your codes annually for increased security and delete guest codes when they are no longer needed.

Show More than Tips

Thanks for submitting a tip for review!

Advertizing

• E'er program your lock with the door open in case the lock malfunctions and stays in the locked position.

Advertisement

Near This Commodity

Thank you to all authors for creating a page that has been read 13,505 times.

If you buy through links on our site, we may earn a commission.

Is this article up to date?

Source: https://www.wikihow.com/Change-Kwikset-Lock-Code

Share this post